Chemical Name: Dibutyltin diacetate
CAS No.:1067-33-0
Molecular Formula: C12H24O4Sn
Molecular weight: 351.03
Appearance: colorless to yellow liquid
Chemical Name: Dibutyltin diacetate
CAS No.:1067-33-0
Molecular Formula: C12H24O4Sn
Molecular weight: 351.03
Appearance: colorless to yellow liquid
Dibutyltin diacetate quick Details
Chemical Name: Dibutyltin diacetate
Another Name: DBTDA
CAS No.:1067-33-0
Molecular Formula: C12H24O4Sn
Molecular weight: 351.03
Appearance: colorless to yellow liquid
Density: 1.32g/mLat 25°C(lit.)
Boiling point: 167-168°C775mm Hg(lit.)
Dibutyltin diacetatetypical Properties
Typical characteristics | Value |
Appearance | colorless to yellow liquid |
Tin content | 33% |
Density at 25℃ | 1.32g/ml |
Boiling point at 10mmHg | 142~145℃ |
Flash point, Tag closed cup | >110℃ |
Refractive index (20℃) | 1.471 |
Dibutyltin diacetate Packaging
Packing: 200kgdrum
NW for 20’FCL with pallets: 1600kg (80drums )
Dibutyltin diacetateProperty
DBTDAis a colorless toyellow liquid, low-temperature white crystals. DBTDAsoluble in the most common ,such as benzene, toluene, ethanol, acetone, ethyl acetate, chloroform, carbon tetrachloride, benzene, ethanol, petroleum ether and other solvents and various industrial plasticizers, DBTDAis insoluble in water.
Promotes rapid gelation and tack-freetimes
Dibutyltin diacetateApplication
CatalystforRTV
DBTDAused as a catalyst in thevulcanizing cure of silicones at room temperatures. Especilally suitable for acetoxy sealant; Has higher catalysis speed than dibutyltindilaurate.Normally the mixed ratio is DBTDA:DBTDL=1:9 to 2:8; also as catalyst of polyurethane coating.
Product safety, handling and storage
Customers considering the use of this product should review the latest Material Safety Data Sheet and label for product safety information, handling instructions, personal protective equipment if necessary, and any special storage condition required. The “Best use before end” date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily
mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.